Attach2 Elite-Tilt Ditching Bucket

The unique opposed cylinder design gives this bucket it’s unique look and power. The single-acting rams mean there is always positive displacement, reducing any possible creeping or chattering. Hoses are also far less vulnerable to damage as the ram ports are above the pivot point.

A double-radius curve means it’s able to cut into the ground at the same angle as the crowd action, making it easier to fill and stop the bucket striking the ground at the rear.

Constructed from BIS400 wear plating on the sides, side cutters and wrap of the bucket, the hardened steel materials strengthen it against damage, caving in and last the test of a rigorous work environment.

The oversized single-acting rams always have positive pressure, keeping the cylinders tight and reducing creeping or chattering.

Easy-to-access greaseable pins and bushes ensure smooth operation and extend the coupler’s lifespan.

Tapered two ways – from the cutting edge to the back of the bucket and from the cutting edge to the top. The double side tapers greatly helps while digging at a tilted angle reducing ground contact.

Fitted with wear strips on the base and back of the bucket to strengthen it, reducing wear and damage to the bucket (for buckets to suit machines from 3 tonnes up), HB400 steel is used for buckets to suit machines from 10 tonnes and up.

Standard from 5 tonnes and up. Extending the lifetime of the bucket, by reducing wear to the cutting edge.